Distribution Connecting Blocks

Tweet

StreetWires DBX44 Dist Block One Ring In-Four 4 AWG Out Review

Price : $39.99

Rate This Product
		Brand:	Streetwires
		List Price:	$39.99
		Our Price:	$29.89
		Total Price: In Stock. Usually ships in 1-2 business days

StreetWires DBX44 Dist Block One Ring In-Four 4 AWG Out Feature

• Designed for systems with up to 4 amplifiers
• Solid brass construction with Diamond Plate Nickel finish
• One input for 5/16" ring terminal
• Four 4 AWG outputs via compression screw

StreetWires DBX44 Dist Block One Ring In-Four 4 AWG Out Overview

An ultra compact solution for power cable distribution. Accepts any gauge power cable with a 5/16" ring terminal. Four 4 AWG outputs.

Boating GPS Chartplotters Boating GPS Accessories

Tweet

XANTECH CB18 Strip-IR Parallel Connecting Block Review

Price : $80.00

Rate This Product
		Brand:	Xantech
		List Price:	$80.00
		Our Price:	$40.15
		Total Price: In Stock. Usually ships in 1-2 business days

XANTECH CB18 Strip-IR Parallel Connecting Block Feature

• Easily connects home-run wires from multiple infrared receivers to the input terminals of a connecting block
• Easily connects home-run wires from match maker room volume controls to the output terminals of a main amplifier
• High-current (12 Amps max) design allows amplifiers rated as high as 500W to be used with the Xantech CB18 1-in/8-out or 8-in/1-out capability
• Nine 4-terminal plug-in connectors on 4-conductor bus
• Screw terminals handle wire sizes from 24 to 12-gauge

XANTECH CB18 Strip-IR Parallel Connecting Block Overview

The CB18 provides a convenient way to parallel many wires onto a common 2, 3, or 4 conductor bus. You can easily connect many home run leads from multiple IR receivers to the input terminals of a Xantech connecting block, or from Xantech 760-00 match maker room volume controls to the output terminals of a main amplifier.

Car Security Alarm Systems Unlocked Phones

Tweet

XANTECH CBCSM1 CSM1 Current Sensor Connecting Block Review

Price : $50.00

Rate This Product
		Brand:	Xantech
		List Price:	$50.00
		Our Price:	$26.67
		Total Price: In Stock. Usually ships in 1-2 business days

XANTECH CBCSM1 CSM1 Current Sensor Connecting Block Feature

• Allows the Xantech CSM1 current sensing module to be used as a general purpose current sensor to sense the power state of a component
• CSM input: interfaces with the 3.5-millimeter stereo mini plug of the CSM1 current sense module
• Pull up output will pass 12V DC whenever the CSM1 detects a power on state (green threshold LED on)
• Pull down terminal is switched to ground (0V) whenever the CSM1 detects a power on state and will pass 12V DC whenever the CSM1 detects a power off state
• Requires Xantech CSM1 and 781RG power supply

XANTECH CBCSM1 CSM1 Current Sensor Connecting Block Overview

The CBCSM1, used in conjunction with the CSM1 current sense module (sold separately), will sense the AC power state of a component and pass a control voltage to another components control input or voltage controlled device. This allows the CSM1 to operate as a general purpose current sensor instead of being used exclusively with an MRC44 or MRC88 controller. The CBCSM1 will provide positive or negative logic on its Pull UP or Pull DOWN terminal connections. Requires CSM1 current sense module and 781RG power supply, both sold separately.

Clothing & Accessories Men Ted Baker

Tweet

SmartDisk 795-20 4 ZONE CONNECTING BLOCK ( 8192 ) Review

Price : $0.00

Rate This Product
		Brand:	SmartDisk
		List Price:	$0.00
		Our Price:	$0.00
		Total Price: In Stock. Usually ships in 1-2 business days

SmartDisk 795-20 4 ZONE CONNECTING BLOCK ( 8192 ) Feature

• Controls 4 individual zone's equipment
• Can control 2 pieces of equipment per zone
• Expandable to 9 zones

SmartDisk 795-20 4 ZONE CONNECTING BLOCK ( 8192 ) Overview

Instead of using separate connecting blocks for each zone (room), this one connecting block can be used to greatly simplify connecting your IR sensors to IR emitters. It separates the shared component IR signals from the zone only dedicated IR signals (eg

Apparel Boys Undershirts

Tweet

XANTECH 796-20 6 Zone Connecting Block Review

Price : $200.00

		Brand:	Xantech
		List Price:	$200.00
		Our Price:	$116.99
		Total Price:	$116.99
		Usually ships in 1-2 business days

XANTECH 796-20 6 Zone Connecting Block Feature

• Allows IR control of elaborate multizone audio/video systems
• Six 3-screw terminal connectors to interface with all Xantech 3-lead IR receivers and/or keypads
• 12 zone emitter ports (3.5-millimeter mini mono jacks) and 1 common port (screw terminals)
• Green LED test indicators are connected in series with the zone outputs - they will only light when the connected emitter or device is conducting current
• Contains a 470-Ohm resistor in series with each out jack

XANTECH 796-20 6 Zone Connecting Block Overview The 796-20 is a six zone connecting block that allows IR control of elaborate multizone audio/video systems. It serves as an expansion module for the 795-20 or, by itself, as a six zone block. Expansion beyond 6 zones can be achieved with multiple 796's, limited only by IR noise considerations. The zone input terminals permit the connection of any Xantech IR receiver, keypad or controller device. Each zone output can control 2 or more pieces of equipment per zone, independent of the other zones, via single or dual emitters or be direct wired to the IR input of Xantech preamps or similar devices. The common output port can drive one single or one dual emitter or the IR input of Xantech connecting blocks for control of common source equipment from any zone. The 796-20 utilizes active isolation devices for elimination of internal zone-to-zone cross-talk as well as high speed amplification to all output ports for operation with a wide range of IR controlled products.

Projection Screens Reviews Apparel Girls Swim

Tweet

Global Cache GC-CXG IR Converter Cable (IR Distribution to GC-IRE IR Extender) Review

Price : $44.95

		Brand:	Global Cache
		List Price:	$44.95
		Our Price:	$38.99
		Total Price:	$38.99
		Usually ships in 4-5 business days

Global Cache GC-CXG IR Converter Cable (IR Distribution to GC-IRE IR Extender) Feature

• Bridges IR outputs to Global Cache GC-IRE IR extender
• IR converter cable, IR distribution to IR extender

Global Cache GC-CXG IR Converter Cable (IR Distribution to GC-IRE IR Extender) Overview The GC-CXG is used to connect a Xantech IR output (any IR emitter port) to the GC-IRE. Xantech IR outputs are converted to meet the IR input requirements for GC-IRE. IR signals received by Xantech IR products can now be digitized by the GC-IRE for networked installations. The GC-CXG is optically isolated to ensure circuit isolation and protection.

Volleyball Stereo Components Speakers Ceiling Apparel Baby Most Gifted

Tweet

360 Degree HDmi Connector Review

Price : $19.95

		Brand:	Next Generation
		List Price:	$19.95
		Our Price:	Too low to display
		Total Price:	Too low to display
		Usually ships in 1-2 business days

360 Degree HDmi Connector Feature

• affordable HDMI adapter
• features a center ball-joint design that enables a 360 rotation
• easily be installed at almost any angle

360 Degree HDmi Connector Overview The Twister by NextGen is the perfect solution. It's an affordable HDMI adapter that can be twisted or turned to virtually any position. The Twister's rotator adapter turned to virtually any position. The Twister's rotator adapter features a center ball-joint design that enables a 360 rotation and90 bend so any HDMI cable can easily be installed at almost any angle. The Twister's high performance design provides 100% signal integrity in any position so full HDMI performance is maintained.

Gel Ink Rollerball Pens